10L - 100L Lab Rotary Evaporator 60W Lifting Motor Power Continuous
Rotary Evaporator Brief introduction :
Rotary evaporator use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.
Features of Rotary evaporator:
• The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials.
• All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion.
• Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum.
• Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.
• Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery.
• Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube.
• Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.
• Check valve control, continuous discharge, the machine in working condition, the vacuum switch.
• All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient
Microprocessor-based power switch control.
• LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.
• Brushless DC motor, stable rotation, no spark, slow down by force.
• Bath electric lift, lift part of the deceleration by force motor, lifting process more stable.
• The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.
• Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.
• Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.
• If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.
10L Rotary Evaporator
| Power supply | 220V/50HZ (various power supply and plug can be customized) |
| Rotating motor power | 60W |
| Lifting motor power | 40W |
| Heating power | 4.5KW |
| Vacuum degree | 0.098Mpa |
| Rotating flask capacity | 10000ml Φ280mm/Φ95mm flange mouth |
| Collecting flask capacity | 5000ml Φ230mm/Φ50mm flange mouth |
| Rotating speed | 0-120rpm/min |
| Temperature controlling range | 0-400℃ |
| Temperature controlling accuracy | ±1℃ |
| Glass temperature range | -80-250℃ |
| Lifting stroke | 0-180(mm) |
| Condenser size | MainΦ130×640H(mm) DeputyΦ130×410H(mm) |
| Feed valve | Φ35 flange mouth |
| Release valve | Φ35 flange mouth*2pcs |
| Discharge valve | ￠10mmglass and lean discharge port |
| Bath size/volume | Φ350×220H(mm) about21L |
| Dimension | 1100*400*1900(mm) |
| Packing size | 1070L×520W×1210H(mm) about0.67m3 |
| Gross weight | 95KG |
20L Rotary Evaporator
| Power supply | 220V/50HZ (various power supply and plug can be customized) |
| Rotating motor power | 60W |
| Lifting motor power | 40W |
| Heating power | 5KW |
| Vacuum degree | 0.098Mpa |
| Rotating flask capacity | 20000ml Φ355mm/Φ95mm flange mouth |
| Collecting flask capacity | 10000ml Φ280mm/Φ60mm flange mouth |
| Rotating speed | 0-120rpm/min |
| Temperature controlling range | 0-400℃ |
| Temperature controlling accuracy | ±1℃ |
| Glass temperature range | -80-250℃ |
| Lifting stroke | 0-180(mm) |
| Condenser size | MainΦ130×680H(mm) DeputyΦ130×410H(mm) |
| Feed valve | Φ35 flange mouth |
| Release valve | Φ35 flange mouth*2pcs |
| Discharge valve | ￠10mmglass and lean discharge port |
| Bath size/volume | Φ450×250H(mm) about39L |
| Dimension | 1200*500*2000(mm) |
| Packing size | 1070L×520W×1210H(mm) about0.67m3 |
| Gross weight | 102KG |
50L Rotary Evaporator
| Power supply | 380V/50HZ (various power supply and plug can be customized) |
| Rotating motor power | 100W |
| Lifting motor power | 60W |
| Heating power | 8KW |
| Vacuum degree | 0.098Mpa |
| Rotating flask capacity | 50000ml Φ470mm/Φ125mm flange mouth |
| Collecting flask capacity | 20000ml Φ355mm/Φ60mm flange mouth |
| Rotating speed | 0-120rpm/min |
| Temperature controlling range | 0-400℃ |
| Temperature controlling accuracy | ±1℃ |
| Glass temperature range | -80-250℃ |
| Lifting stroke | 0-180(mm) |
| Condenser size | MainΦ160×840H(mm) DeputyΦ160×480H(mm) |
| Feed valve | Φ35 flange mouth |
| Release valve | Φ35 flange mouth*2pcs |
| Discharge valve | ￠15mmglass and lean discharge port |
| Bath size/volume | Φ550×320H(mm) about76L |
| Dimension | 1400*600*2250(mm) |
| Packing size | 1270L×620W×1440H(mm) about1.133m3 |
| Gross weight | 118KG |
Company Introduction
Factory Show of Rotary Evaporator
Certificate
Our Services
Product Tags:
|
|
100L Lab Rotary Evaporator Images
|
